|
 |
X113 Slim-line Linear Position Sensor
Intrinsically Safe sensors for Hazardous GAS atmospheres
Available in any travel from 10mm to
50mm.
Preferences
Positek offers a range of options for its standard
sensors.
Each sensor is manufactured to suit the customer's
individual preferences.
If your requirement is outside the options given below,
Positek can modify/ redesign a sensor to suit your
specific requirement.
Standard options are available as below: |
Measurement range:
Factory set to any length from 10mm to 300mm in increments
of 1mm.
For example, if your application requires 10"
(254 mm) measurement
then Positek will manufacture the sensor specifically
for this length.
The mechanical length and calibration will be set
up for 254 mm. |
| Galvanic
Barrier Output Options: |
|
| Output
Signal |
Supply
Input |
Option
code
|
| 0.5-9.5V dc |
+24V dc nom. + 13-28V |
Z010
|
| 4-20mA (3 wire source) |
+24V dc nom. + 13-28V |
Z420
|
|
Connector/Cable Options:
|
Option
code
|
| Connector - Hirschmann
ELWIKA 4102 Axial, IP67 |
J
|
| Connector - Hirschmann
ELWIKA 4102 Radial, IP67 |
K
|
| Cable with
PG9 gland Axial, Gland IP67 |
L
|
| Cable with boot, Radial
IP67 |
I
|
| Cable
length - The standard length of cable supplied with
a Positek position sensor is 50cm although you can
specify any length you require, up to a maximum of
15000cm. |
Specified
in cm after the L or I
e.g. L200 for 200cm cable from axial cable gland
|
| Mounting Options: |
Option
code
|
| Rod eye on body (only with Option 'R') |
N
|
| M5x0.8 male thread
(body) |
Blank
|
| Rod eye on push rod |
U
|
| M5x0.8 male thread
(push rod) |
Blank
|
| Push Rod Options: |
Option
code
|
| Non captive push rod |
V
|
| Approved
Galvanic Barriers: |
Order
code
|
| 0.5 - 9.5 V dc Output
version |
BX002
|
| 4-20 mA Output version
|
BX003
|
Free
Design Service
If you need a position sensor that is
outside the scope of the above options to suit your installation
requirement or specification, Positek will be happy to modify
or create a new design to suit your needs
Contact
Positek Technical Department - Click Here
|
Back To Top
| Home Page | Quality | Products | Part
Number Coding | Case Studies |
| Help Desk | Enquiries | Distributors | How to find us |
|
