The Intrinsically Safe E112 is ATEX and IECEx approved for use in potentially explosive gas/vapour and dust atmospheres. It is designed for gauge head positioning in industrial and scientific applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. Provides a linear output proportional to displacement Output calibrated to the travel required, from 0-5mm to 0-50mm and with full EMC protection built in Overall performance, repeatability and stability are outstanding over a wide temperature range The sensor is very robust, the body and plunger being made of stainless steel for long service life and environmental resistance. The plunger is spring loaded with a domed end Easy to install with a long ½ inch UNF mounting thread and is supplied with two lock nuts for positioning Environmental sealing is to IP67 Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier. Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs. The sensor can be installed with a cable length up to 1km between the sensor and the amplifier. Click the below link for more detailed guides and information: Drawing, Datasheet, Installation Guide & P/N Configurator