The intrinsically safe X100 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for demanding hydraulic or pneumatic cylinder position feedback applications where service life, environmental resistance and cost are important and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. Overall performance, repeat-ability and stability are outstanding over a wide temperature range The unit is highly compact and space-efficient, being responsive along almost its entire length Provides a linear output proportional to displacement Output calibrated to the travel from 0-5mm to 0-800mm and with full EMC protection built in Very rugged, being made of stainless steel with an inert fluoropolymer-sheathed probe and stainless steel target tube Easy to install in cylinders and has a wide range of mechanical options Environmental sealing is to IP65 or IP67 depending on selected cable or connector options. The sensor can be installed with a cable length up to 1km between the sensor and the amplifier. Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier. Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs. Click the buttons below for more downloadable information: Drawing, Datasheet, Installation Guide & P/N Configurator