The intrinsically safe X112 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for gauge head positioning in industrial and scientific applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. Provides a linear output proportional to displacement Output calibrated to the travel required by the customer, from 0-5mm to 0-50mm with full EMC protection built in Overall performance, repeatability and stability are outstanding over a wide temperature range The sensor is very robust, the body and plunger being made of stainless steel for long service life and environmental resistance The plunger is spring loaded with a domed end The X112 is easy to install with a long ½ inch UNF mounting thread and is supplied with two lock nuts for positioning Environmental sealing is to IP67. Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs. The sensor can be installed with a cable length up to 1km between the sensor and the amplifier. Click the below buttons for more downloadable information and guides: Drawing, Datasheet, Installation Guide & P/N Configurator